Sagem F@st 244x Guía de instalación descargar pdf (Pagina 158)

6 - Information / Configuration

SAGEM F@st™ 240x/244x Reference Manual - 288097371-02

Page 6-88 Sagem Communication document. Reproduction and disclosure prohibited

Field Action

Mark 802.1p if 802.1q is enabled

on WAN

Select a priority value between 0 and 7 from the

scroll down list.

Note: The "Enable 802.1q" box is only present in

"Bridging" mode. This condition is

transparent for the other modes.

Physical LAN Port

Select the interface of your choice (ENET, USB,

Wireless or Wireless_Guest) from the scroll down

list.

Protocol

Select the protocol of your choice from the scroll

down list (TCP/UDP, TCP, UDP or ICMP).

Source IP Address

Enter a "Source" IP address.

Source Subnet Mask

Enter a "Source" subnet mask.

UDP/TCP source Port

(port or port:port)

Enter a "Source" port or range of ports.

Note: For one port, for example, enter 80. For a

range of ports, enter 80:90.

SET-1 Destination IP Address

Enter a "Destination" IP address.

Destination Subnet

Mask

Enter a "Destination" subnet mask.

UDP/TCP Destination

Port

(port or port:port)

Enter a "Destination" port or range of ports.

Note: For one port, for example, enter 80. For a

range of ports, enter 80:90.

Source MAC Address

Enter a "Source" MAC address.

Source MAC Mask

Enter a "Source" MAC mask.

Destination

MAC Address

Enter a "Destination" MAC address.

Destination MAC Mask

Enter a "Destination" MAC mask.

SET-2 802.1p Priority

Select a priority value between 0 and 7 from the

scroll down list.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 253 254

Comentarios a estos manuales

Sin comentarios

Sagem F@st 244x Guía de instalación Pagina 158

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Sagem F@st 244x