Sagem 2604 Guía de instalación descargar pdf (Pagina 133)

5 - Information / Configuration

SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A

Sagem Communications document. Reproduction and disclosure prohibited Page 5-97

Field Action

Physical LAN Port

Select Blank or the interface of your choice

(ENET(1-4), Wireless or Wireless_Guest) from the

scroll down list.

Protocol

Select Blank or the protocol of your choice from the

scroll down list (TCP/UDP, TCP, UDP or ICMP).

Differentiated Services

Code Point (DSCP)

Check

Select the type of Differentiated Services Code

Point (DSCP) mark to be allocated

(6-bit coding) from the scroll down list.

Default to CS7 : 000000 to 111000

See the first table of this chapter.

Source IP Address

Enter a "Source" IP address.

Source Subnet Mask

Enter a "Source" subnet mask.

UDP/TCP source Port

(port or port:port)

Enter a "Source" port or range of ports.

Note: For one port, for example, enter 80. For a

range of ports, enter 80:90.

Destination IP Address

Enter a "Destination" IP address.

SET-1 Destination Subnet

Mask

Enter a "Destination" subnet mask.

UDP/TCP Destination

Port

(port or port:port)

Enter a "Destination" port or range of ports.

Note: For one port, for example, enter 80. For a

range of ports, enter 80:90.

Source MAC Address

Enter a "Source" MAC address.

Source MAC Mask

Enter a "Source" MAC mask.

Destination MAC

Address

Enter a "Destination" MAC address.

Destination MAC Mask

Enter a "Destination" MAC mask.

SET-2 802.1p Priority

Select Blank or a priority value between 0 and 7

from the scroll down list.

Note: 802.1p Priority cannot be selected together

with IP traffic condition.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 231 232

Comentarios a estos manuales

Sin comentarios

Sagem 2604 Guía de instalación Pagina 133

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Sagem 2604