Sagem SAGEMFAST 1500WG Guía de instalación descargar pdf (Pagina 28)

27 Troubleshooting

SAGEM F@st™ 1500 / 1500WG

If access to the configurator is still impossible, you should carry out the following

instructions:

1. Check that the Ethernet cable is properly connected at both its ends.

2. Check that your computer is configured in DHCP client.

In Windows

• Click on Start and then on

Configuration tab in Network

Properties.

• Click on the wireless network card's

TCP/IP protocol, then click on

Properties.

The screen opposite will be displayed.

• Select the General tab, then the

"Obtain an IP address automatically"

and "Obtain DNS server address

automatically" commands.

• Click on the OK button to validate

your choice.

In Mac

• Click on the Apple menu in the menu

bar, select System Preferences, then

click on the Network icon. The

following screen will be displayed.

• Select the TCP/IP tab.

The Configure field should display

Using DHCP by default.

If this is not the case, select this value

by means of the drop-down list.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 37 38

Sin comentarios

Sagem SAGEMFAST 1500WG Guía de instalación Pagina 28