Sagem SAGEMFAST 1500WG Guía de instalación descargar pdf (Pagina 25)

Installing servers on the local network 24

SAGEM F@st™ 1500 / 1500WG

Depending on the type of server you wish to install, the parameters you need to indicate

differ:

Private FTP server access Private HTTP server access

from the Internet: from the Internet:

port 20 or 21 port 80

Protocol TCP TCP

Port 20 or 21 80

Local IP address IP address IP address

of your FTP server of your HTTP server

Some Peer-to-Peer software programs (e.g. "eMule" and "eDonkey") require an additional

configuration of the modem/router:

• Select the NAT menu

in the column to the

left of the screen and

then select the sub-

menu Virtual Server.

The screen opposite

will be displayed.

For each virtual port:

• Indicate your server's

local IP address.

• Indicate the protocol

and the LAN port

used for the local

server (LAN).

• Indicate the public

port used for the

remote server (WAN).

• Check the Enable

box.

Configuring the modem/router for Peer-to-Peer software

programs

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 37 38

Sin comentarios

Sagem SAGEMFAST 1500WG Guía de instalación Pagina 25